Neutral Insulating Glass Two Components Silicone Sealant
Directions for use
1. Ensure all surfaces are clean, dry ad grease-free. Remove all grit, oil, grease, detergents, flaking paint, any loose materials and old sealant.
2. Cut off tip of nozzle and cartridge. Screw on nozzle to cartridge.
3. Fit into chalking gun, applyn surface in steady flow.
4. If required smooth and shape sealant with spatula dipped in mild detergent.
5. Remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant an be removed by trimming with a sharp knife.
| Acetic Silicone Sealant |
| Appearance | Smooth paste without bubble or particles |
| Color | Clear; White; Black; Grey and other special color |
| Specific Gravity | 0.95 to 1.0g/ml |
| Skin time (25°C/65% R.H.) | 3 ~5 mins |
| Full cure time (25°C/65% R.H.) | 1-3days |
| Hardness Shore A | 25 |
| Temperature Resistance | -40°C to +150°C |
| Elongation at Break | Elongation at Break |
| Shelf Life | 12 months |
Application Tips
To obtain a smooth and neat finish, apply masking tape and remove before sealant cres.
Paint surfaces completely before applying sealant.
Before processing, observe the instructions in our product leaflets and safety data sheets.
Material preparation:
For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.
DO NOT clean glass with soap and water solutions.
Soap residue can cat as a release agent and result in adhesion failure.
Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.
Application:
1. Glass must be properly prepared as described.
2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.
3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass.
Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.
Product Show
Colors
Product Usage
About US
Yuanyang Co.,Ltd Integrates Product independent design sales for the integration of the company.we are the professional manufacture of silicone sealant.our product includes structural silicone sealants and neutral waterproof silicone sealants,are widely used in both indoor and outdoor sealing,bonding and structural assemly of all kinds of large and medium-sized builing curtain wall systems.Through the advanced research and development capabilities,we produce more new products like silicone sealant,for window and door decoration sealant industrial sealant and so on.
We welcome new and old customers from all walks of life to contact us for future business relationships and achiving mutual success.
Product Precess
Packaging & Shipping
FAQ
Q1:Are you factory?
A1: yes, we are factory.
Q2:Can I do an OEM?
A2:Yes,we do the brand, logo as your requirements.
Q3: What other products do you have?
A3: Besides our mainly products Spray polyurethane foam, and silicone sealant, we also have many other products, such as polyurethane foam cleaning agent,liquid nails,contact adhesive, marble adhesive ,building anchorgae glue,epoxy resin AB glue etc.
Q4:Why we choose you? What is your strength?
A4:With 27 years experiences in this field, we are a professional supplier of the well-know customers. Our facilities conform to the standard audit requirement and our products meet the certification terms from different countries and areas.
Q5:What is your sample policy?
A5: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, we only supply the Cured sample.And the freight cost need to be prepaid by customers.
Q6: Agent's wanted?
A6: Welcome general agent all over the world.
Product Tags:
|
|
Glass 100% Two Component Silicone Sealant Adhesive For Insulating Glass Images
|
